Vip-Vision NVR8PRO User Manual

MODEL: NVR8PRO(PACK)2 Professional IP Surveillance Pack Network Video Recorder with 8 Security Cameras „QUICK INSTALLATION GUIDE‟ NVR 8 x

9 To Set Up Recording Rates Right click to open the menu and select MAIN MENU, then select SETTINGS followed by

10 To Set a Cameras Colour Settings 1. Right click to open the menu and select MAIN MENU, then select REMOTE DEV

11 Motion Detection Should you wish to use Motion detect recording, it can be set per camera, per time period and

12 How to Playback Video Footage on your NVR 1. Right click anywhere on the screen to bring up the menu and log

13 How to Backup Video Footage on your NVR 1. Right click anywhere on the screen to bring up the menu and log on

14 Using a PC to find available IP Addresses Before setting up your NVR you will first need to find it an IP addr

15 Set Up the NVRs Networking Right click to open the menu and select MAIN MENU, then select SETTINGS followed by

16 How to use an external POE Switch NVR (optional) Installation with external POE Switch Rear Panel

17 Using the NVR to manually set the IP Address of an IP Camera (optional) 1. Right click to open the menu and s

18 5. The IP Camera should now be listed with its new IP Address. You can then tick the new camera you wish to c

1 HDD NOTE: This NVR is designed to only work with 24hr rated Enterprise, NAS and Video Surveillance Hard Drives.

19 Simple Configuration of your NVR for Remote Access by QR code To be able to set your NVR up for Remote Access,

20 DMSS Mobile App by QR Code App available for Android, iOS, Blackberry, Symbian, Windows Mobile and Windows 7 m

21 Advanced Configuration of your NVR for Remote Access by IP Address (optional) To be able to set your NVR up f

22 Set up DDNS on your NVRPRO (optional) DDNS is a service that will track your numeric IP address and allow you

23 DMSS Mobile App by IP Address (optional) App available for Android, iOS, Blackberry, Symbian, Windows Mobile a

24 How to enable ActiveX Controls in Internet Explorer (optional) We can only recommend using ActiveX Intern

25 Troubleshooting Please refer to the FAQ table below for easy troubleshooting. The table below describes some t

26 Limited Warranty Cornick Pty Ltd (Seller) warrants its products to be in conformance with its own plans and sp

27 PLEASE CUT OUT & RETURN THIS INFORMATION WITHIN 14 DAYS OF PURCHASE TO: RhinoCo Technology 9 Hannabus

2 NVR8PRO2 Package Contents (Before installation, please ensure you have all the parts listed below). Addition

3 Installation Before installing this unit, please read through the following points:  Do not place cords from

4 Connection Guide 1. Mount the 8 Cameras as required and connect them to the in-built POE Network Switch using

5 Front Panel 1,5 “NUMERALS” Buttons marked with numbers can be used to enter numeric data when in numeric

6 Main Screen Once booted, you will be presented with the screen below (camera may only be black if not yet set u

7 Set the Time and Date When using your NVR for the first time, you will have to set the SYSTEM TIME.  Right

8 To Connect Cameras  Right click to open the menu and select “MAIN MENU”.  Select “SETTING”  Select “REM