Vip-Vision NVR8PRO User Manual download pdf (Page 5)

Connection Guide

1. Mount the 8 Cameras as required and connect them to the in-built POE Network Switch using

the supplied Network Cables.

2. Connect the 48V Power Supply to the in-built POE Network Switch portion.

3. Connect the 12V Power Supply to the NVR portion.

4. Plug both power adaptors into a Power-point.

5. Switch NVR on from back of device. Hold Power button for 3 seconds.

6. The power LED at the front of the NVR should now be illuminated and the unit will make a loud

beep sound to indicate it is powered.

7. Connect the included mouse to the USB port on the front or back..

8. Connecting your local network or modem to the LAN Port of the NVR (we recommend doing this

last step after all the cameras have been configured).

1 2 3 4 5 6 7 8 9 10 ... 27 28

No comments

Vip-Vision NVR8PRO User Manual Page 5